SECVEST WIRELESS MAGNETIC CONTACT CC (BROWN)

Product highlights

The wireless magnetic contact detector is a component of the Secvest 2WAY and is also suitable for the Terxon with a wireless expansion module. Unauthorized opening of doors and windows is detected by a magnetic contact and reported to the wireless alarm center. The ideal place of installation for the wireless magnetic contact detector is the center of your door or window frame. It is also possible to install it at the lower window frame if a window is to be tilted with the magnetic contact armed. The wireless magnetic contact detector consists of a detector and a magnet. These are arranged parallel to each other at a distance of between 3 and 10 mm. The detector triggers as soon as this distance increases. The wireless magnetic contact detector for the Secvest 2WAY is available in elegant white (FU8320W / FU8321W) or brown (FU8320B / FU8321B). For wiring additional zones, you have a choice between NC wiring (FU8320B / FU8320W) and DEOL wiring (FU8321B / FU8321W). For the latter the scope of delivery includes: a line resistor (2k2) and an alarm resistor (4k7). You can connect the additional alarm zone with a passive glass breakage detector, for example. This way you are protecting the window not only from unauthorized opening, but you are also alarmed in the event of glass breakage. Other settings, such as deactivating the LED or using the detector as a pure wireless module are possible using jumpers.